Hume PinetrimXT - H3 L.O.S.P Primed Treated Pine is produced for long term biological protection against Borers, termites, rot and weathering. This provides long lasting protection and makes Pinetrim H3 very durable for external above ground applications exposed to the environment.
Click profile images for more
Cutting & Joining
When cutting always cut through the front to help eliminate fibre tear and when joining Pinetrim H3 L.O.S.P Primed we recommend mitre cuts be used and the joint glued. It is desirable that the cross-sections are as uniformed as possible to prevent exposure. For all outside surfaces exposed by cutting after treatment, an appropriate re-sealing/treatment product should be applied.
Some metal fasteners in contact with H3 treated pine may exhibit a propensity to corrode. For longevity of fixings in external applications hot dipped galvanized steel or stainless fixings are recommended (Check with your local building authority for class of fixing).
Before painting PinetrimXT H3 Primed must be dry and clear of dirt or oil residue. Fill any defects (nail holes, cuts etc) lightly sand and apply minimum 3 coats of external grade paint. (Please check paint manufacturer’s recommendations). For best results finish painting within 30 days of installation (if weathered over 30 days re-priming may be required).Learn more
Hume Doors & Timber embraces environmental awareness, protection and enhancement. We are commitment to using suppliers who achieve sustainable management of natural forest and safeguard the ecological balance and global ethics. We ensure that our preferred suppliers of Pinetrim have FSC® Certification and/or similar independent accreditation and abide by guidelines and hold the principles of these standards.
We will not use, manufacture or market any product or service unless we have total satisfaction that it can be achieved safely and with care for the environment.Learn more
Hume PinetrimXT H3 L.O.S.P Primed Treated Pine is natural product and care must be taken to ensure the product remains dry at all times during storage and delivery to site. Before installation store under cover in a clean dry environment away from moisture, excessive heat and direct sunlight.Learn more
PinetrimXT H3 L.O.S.P Primed biologically treated pine has been impregnated with a chemical solution containing two components; fungicide and insecticide. Preservatives are forced deeply into the timber, treating the pine to give long term resistance to decay, insects and other wood destroying organisms. This effective and lasting protection of pine enables it to be used in many applications outliving untreated and naturally durable timbers in exposed conditions.